Home  |  New Parts  |  Cart 0 item(s): $0.00
Engine: 6.9L/7.3L
Batteries
Brakes
Brakes and Wheels
Clutch, Trans, Diff, Rear Axle, PTO
Cooling Systems
Electrical, Starting and Charging
Engine
Engine Parts
Exhaust
Filters
Front Axle, Steering
Front End Components
Fuel System Components
Gauges, Instruments, Cables
Heater and Defroster
Hitch and Implement Components
Hoods, Grilles, Decals
Ignition & Electrical
Manuals - Service & Owners
Mirrors
Muffler
Pumps: Hydraulic & Steering
Rear Rims, Fenders
Seats
Seats and Accessories
Sheet Metal and Grille
Steering and Suspension
Switches, Instrument Clusters and Gauges
Transmission
Wheels, Hubs and Components
Wiper Blades
Center opening dual air intake with snap hardware included.
WinterFront Radiator Cover Dual Air Intake
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
From 1989-1991 Ford used this glow plug harness in the F250,  F350, F450 super Duty, F59 trucks that had International 7.3L motors.  We build this harness as close as possible to the stock harness that Ford supplied with the truck.  
The original Harness had a special Ford connector that, by now has burnt up in almost all cases . Replacement connectors are not available anywhere.
We supply a new connector that you will install at your fire wall.   This New connector replaces the one on your fire will and is much more appropriate for the electrical loads placed upon it.

Connector directions included and wiring schematic included.

PLEASE READ BEFORE YOU ORDER: At least 30 years have passed since your machine was built. Many people have worked on, rearranged or changed your machine. Customer/installer accepts all liability. Customer/installer must check existing wiring and appliances before connecting to and powering up system. Before you or your installer powers up a system, it is customer\'s responsibility to make sure that harness is correct for the application. Because the previous old harnesses may have damaged other harnesses and or appliances, Scout Parts, Travelall Parts, Portland Wiring Harness and Pacific Supply Group accept no liability for any machine or appliance that you attach this new harness to. Miss-pins: Every effort is made to check pin-outs. Anything done by humans will have imperfections. Customer/Installer must check pin-outs. It is installer’s responsibility to verify pin-outs and to power up only one system at a time to minimize the risk of damage to electrical components.
These harnesses are made to order. 

<img src=\"/images/usaflag-backed.gif\" /> Made in America. 

DISCONNECT BATTERY before doing any work.   PLEASE READ BEFORE YOU ORDER:   At least 40 years have passed since your machine was built.  Many people have worked on, and changed things from factory configuration.  It is customer\'s responsibility to make sure that harness  and contact arrangement is correct for the application.   Because the previous old harnesses may have damaged components in your electrical system,  Pacific Supply Group accepts no liability for any device that you attach this new harness to.
Ford 7.3L Glow Plug Wiring Harness (1989-1991)
Model(s): 6.9L/7.3L
If you need an original International glow plug relay instad of a cheapo aftermarket relay, this is the original part. If you have the 2 pin connector on your relay International includes a 2 pin pigtail mounted on these relays.
Glow Plug Relay With 2pin Female Plug For T444e - 7.3L
Model(s): 6.9L/7.3L
This cover will fit onto any toggle switch that you want to protect it from being accidentally turned on or off. 
I have a few of these and they make me feel like I am piloting an airplane. - Will fit and work with all standard toggle switches.  7/16\" hole.
Red Toggle Safety Cover - On Off
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
Price: $107.79 Price: $402.62 Price: $152.91 Price: $5.35 - $5.35
Add to Cart Add to Cart Add to Cart Add to Cart
Air filter for 7.3 IDI (T444E) MOTORS

Style: Air Filter with Wrap 
Service: Air 
Height: 6.937 
Outer Diameter: 11.500 
Inner Diameter: 8.625 
Ends: Plastic 
CFM: 170
Air Filter With Outer Foam For T444E
Model(s): 6.9L/7.3L
This switch screws into the water pump and is a two prong electrical connection.
HPCA (High Pressure Cold Advance) Fast Idle Switch For 4000 Series Trucks With 7.3L IDI
Model(s): 6.9L/7.3L
Just let the rusty part sit in the solution for 30 minutes and the rust will be converted back in to metal.
The safest rust remover on the market.
No acids, VOC's or fumes, safe on skin and eyes, removes rust on bare metal. NOT poisonous,  water based and non flammable, PH neutral, biodegradable and ready to use. 

You will love it.   MOST EFFECTIVE RUST REMOVER WE HAVE EVER USED.
Rust Desolver Evapo-rust
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
Mounted on the rear of the intake manifold near the firewall, this relay controls the power running to the glow plugs. When the ignition is in the on position, the relay should pulse power to heat the glow plugs in short intervals. If your glow plugs are not working, this part may be the problem.
Glow Plug Relay And Timer For 7.3 IDI T444E 4000 Series Trucks
Model(s): 6.9L/7.3L
Price: $32.73 Price: $102.29 - $102.29 Price: $5.30 - $13.66 Price: $213.17 - $332.06
Add to Cart Add to Cart Add to Cart Add to Cart
12 volt 16 amp Push ON - Pull OFF switch. 
Very cool screws that tighten and hold the wires in place. 
Only requires a 5/16th\" hole to mount.  A very small switch for the amount of amps that it provides.
Push Switch, Push (on) / Pull (off)
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
Water pump for 6.9 and 7.3 Engines NOT made in China. This is the real part made in USA.  So if you want one at this price, order now. NEW OLD STOCK might be the last one we ever see.
Water Pump - NEW OLD STOCK
Model(s): 6.9L/7.3L
Spray cleaner cleans all the corrosion and acid from your battery terminals.  Promotes long battery life and keep the voltage from leaking. Also has an acid indicator that turns from yellow to pink.
Battery Terminal Cleaner Spray
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
In our experience, glow plug problems typically are caused, at least in part, by a failure in this harness. OEM part number 1807648C94.  This is the original style glow plug harness for the 7.3L International engine as used in International trucks. This harness should fit early trucks that have the glow plug relay mounted on the rear of the intake manifold. THIS WILL NOT FIT A Ford truck with an International engine.  Made in the USA.  

Because there have been some cases where this does not fit, the best thing to do is to remove your harness, take a good picture of it and e-mail it to us before you purchase it, so we can be 100% certain that it is exact. 

The harness is built using the most common configuration. We have provided a detailed top of engine photograph so that you can compare it to your specific engine.

<img src=\"/images/usaflag-backed.gif\" /> Made in America. 

DISCONNECT BATTERY before doing any work.   PLEASE READ BEFORE YOU ORDER:   At least 40 years have passed since your machine was built.  Many people have worked on, and changed things from factory configuration.  It is customer\'s responsibility to make sure that harness  and contact arrangement is correct for the application.   Because the previous old harnesses may have damaged components in your electrical system,  Pacific Supply Group accepts no liability for any device that you attach this new harness to.
Glow Plug Wiring Harness For 7.3L IDI International Trucks
Model(s): 6.9L/7.3L
Price: $4.36 Price: $243.73 Price: $5.41 Price: $196.62
Add to Cart Add to Cart Add to Cart Add to Cart
Easy to use and hook up.  Medium duty switch.  Great way to turn on or off a electrical device. 
ON-OFF two position switch 12 volt 15 amp.
Switch -Toggle - Medium Duty -12 Volt 15 Amps
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
Great little switch, 12 volt 15 amp.  This switch is ON-OFF-ON .
Medium duty for most anything you would want to switch.
Toggle Switch - Medium Duty - 3 Pole
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
This roll is 1 inch wide and 12 feet long. Stretch, Wrap and Rescue yourself.   Stretch it and it permanently bonds to itself.
Tensile strength is 950 PSI.   Works in temperatures from -65 to  500 degrees fahrenheit. Electric insulation 8,000 volts. Waterproof and airtight. Made in USA.
Can be used on fuel lines, radiator cooling hoses, vacuum compressed air lines,  and hydraulic lines. Resistant to fuel, oil and hydraulic fluid, heat and cold.

Four wheeler magazine says, \"This stuff is like duct tape on steroids!\"

The only silicone tape used by the US Army vehicle & tank battle damage assessment kit.
Rescue Tape - Silicone - Stretch, Wrap And Rescue Yourself
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
This switch is momentary on, normally off.
12 volt, 60 amp. offen used for horns and starting.
This is a heavy duty switch often used with out a relay.
Switch, Momentary - Water Proof
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
Price: $7.62 Price: $5.45 Price: $10.88 Price: $13.10
Add to Cart Add to Cart Add to Cart Add to Cart
This is a 100\' spool of 10 GA heat resistant wire. You can use this wire for high temp applications like glow plug harness repair. The 7.3L motor uses a 6v glow plug and the harness heats up quite a bit.

This wire is rated at 257 degrees farenheit.

<img src=\"/images/usaflag-backed.gif\" /> Made in America. 

DISCONNECT BATTERY before doing any work.   PLEASE READ BEFORE YOU ORDER:   At least 40 years have passed since your machine was built.  Many people have worked on, and changed things from factory configuration.  It is customer\'s responsibility to make sure that harness  and contact arrangement is correct for the application.   Because the previous old harnesses may have damaged components in your electrical system,  Pacific Supply Group accepts no liability for any device that you attach this new harness to.
Glow Plug Harness Heat Resistant Wire - 100' Spool
Model(s): 6.9L/7.3L
If you are having problems with your  truck being reliable, this is just the product for you.  
 Keeps battery terminals corrosion free. 
Seals high energy Ignition system wiring.
prevents voltage leakage, use it on your spark plug boots to prevent voltage leakage.
Made in the USA
<img src=\"/images/usaflag-backed.gif\" />
Dielectric Connection Grease - Protect Ignition Voltage And Battery -
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
The batteries on the 4000 series trucks are located below the steps in the cab, we use these battery boxes for our fleet with great results. This battery box will contain any acid that leaks out.  comes with hold down strap.  It is also adjustable for smaller batteries. It has a movable divider. Holds batteries 8"wide X14"long 8" tall.  Protect your battery and sheet metal.
Battery Box For Group 27-31 International 4200 4700 4900
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
Water proof your switch.  Made of rubber and has a brass threaded ring that screws onto your existing switch.  Has a lot of stretch so will fit on most any toggle switch.
Switch Cover - Water Proof - Toggle
Model(s): 6.9L/7.3L, 9.0L, DT/DTA360, DT/DTA466, DT408/DT...
Price: $87.36 Price: $5.45 Price: $21.80 Price: $2.71
Add to Cart Add to Cart Add to Cart Add to Cart

We sell aftermarket parts for International 4700s. International 4700 parts.com is not affiliated with International Motor Company. Any mention of international 4700 is for description purposes only.

Call to Order: 888-288-0550
Credit Card Badges
Contact Us | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2020 Pacific Supply Group.